Superficial x-ray radiation therapy is a type of external beam radiation therapy that uses low-penetrating x-rays to kill the cancer cells on or close to the surface of the skin.
Depending on the size and depth of cancer and where it is located, the doctor may opt for low-energy x-rays (photons) or electrons to carry out superficial x-ray radiation therapy.
The radiation beam only penetrates the skin surface. It avoids deep tissue damage and minimizes scarring.
Superficial x-ray radiation therapy is mainly used for the treatment of the following conditions:
You will lie on the treatment table according to the position determined by simulation.
The mold, shield, measurements, tracings, and photographs taken will help in placing you in the exact same position during each radiation therapy session.
The different types of machines that can be used for superficial x-ray radiation therapy include:
LINAC machine: Electron beams are used and applicators (extra parts) are attached to the machine to treat skin cancer.
Superficial x-ray machine: This is a much smaller machine than the LINAC machine. It has severable movable parts and is normally on wheels. Low-energy photons are used for the treatment of skin cancers.
The machine or applicators are placed on or near your skin.
The doctor leaves the room and goes to an adjacent room before radiation therapy is started.
The machine will emit radiation and stay in its position throughout the treatment. You will not feel anything during the therapy.
The procedure usually lasts for about 15 to 20 minutes.
You can usually go home immediately after the therapy session.
The number of radiation therapy sessions varies depending on the type and severity of cancer being treated. It may vary from a single session for one day to a session every week for up to six weeks.
Superficial x-ray radiation therapy has the following side effects:
Keep the treated area covered when stepping out in the sun.
Use sunscreen having an SPF of a minimum value of 30 when stepping out.
The side effects due to superficial x-ray radiation therapy usually peak at approximately two weeks after treatment, and ease out at approximately three to four weeks after treatment.
Use soap without fragrance and a moisturizer to keep your skin moist after treatment.
Avoid swimming for a couple of weeks after treatment.
After having a bath, pat your skin dry using a towel.
Your skin may appear paler or you may notice small veins in the treatment area a few months or years after treatment. You should continue to keep the treated area covered and use sunscreen when stepping out, as your skin is much more sensitive to the sun.
Follow-up appointments with the doctor are needed to check the success of the treatment.
Our team will get in touch with you within the next 24 hours. You can also call us on +918080802665.
Superficial x-ray radiation therapy is a type of external beam radiation therapy that uses low-penetrating x-rays to kill the cancer cells on or close to the surface of the skin.
Depending on the size and depth of cancer and where it is located, the doctor may opt for low-energy x-rays (photons) or electrons to carry out superficial x-ray radiation therapy.
The radiation beam only penetrates the skin surface. It avoids deep tissue damage and minimizes scarring.
Superficial x-ray radiation therapy is mainly used for the treatment of the following conditions:
You will lie on the treatment table according to the position determined by simulation.
The mold, shield, measurements, tracings, and photographs taken will help in placing you in the exact same position during each radiation therapy session.
The different types of machines that can be used for superficial x-ray radiation therapy include:
LINAC machine: Electron beams are used and applicators (extra parts) are attached to the machine to treat skin cancer.
Superficial x-ray machine: This is a much smaller machine than the LINAC machine. It has severable movable parts and is normally on wheels. Low-energy photons are used for the treatment of skin cancers.
The machine or applicators are placed on or near your skin.
The doctor leaves the room and goes to an adjacent room before radiation therapy is started.
The machine will emit radiation and stay in its position throughout the treatment. You will not feel anything during the therapy.
The procedure usually lasts for about 15 to 20 minutes.
You can usually go home immediately after the therapy session.
The number of radiation therapy sessions varies depending on the type and severity of cancer being treated. It may vary from a single session for one day to a session every week for up to six weeks.
Superficial x-ray radiation therapy has the following side effects:
Keep the treated area covered when stepping out in the sun.
Use sunscreen having an SPF of a minimum value of 30 when stepping out.
The side effects due to superficial x-ray radiation therapy usually peak at approximately two weeks after treatment, and ease out at approximately three to four weeks after treatment.
Use soap without fragrance and a moisturizer to keep your skin moist after treatment.
Avoid swimming for a couple of weeks after treatment.
After having a bath, pat your skin dry using a towel.
Your skin may appear paler or you may notice small veins in the treatment area a few months or years after treatment. You should continue to keep the treated area covered and use sunscreen when stepping out, as your skin is much more sensitive to the sun.
Follow-up appointments with the doctor are needed to check the success of the treatment.
A. Superficial x-ray radiation therapy is a form of external beam radiation therapy in which low-penetrating x-rays are used to kill the cancer cells on or near the surface of the skin.
A. The different types of radiation beams that can be used for superficial x-ray radiation therapy include:
Low-energy x-rays (photons)
Electrons
A. Superficial x-ray radiation therapy is a form of external beam radiation therapy in which low-penetrating x-rays are used to kill the cancer cells on or near the surface of the skin.
A. The different types of radiation beams that can be used for superficial x-ray radiation therapy include:
Low-energy x-rays (photons)
Electrons
A. Superficial x-ray radiation therapy can be used for the treatment of the following types of cancers:
Non-melanoma skin cancers (a group of cancers starting from the outer layer of the skin)
Basal cell carcinoma (skin cancer that starts in the basal cells)
Squamous cell carcinoma (skin cancer characterized by the abnormal and quick growth of the squamous cells)
Kaposi’s sarcoma (cancer that causes soft tissue lesions)
Keloid scars (a raised scar following healing of an injury)
A. Superficial x-ray radiation therapy is performed by a radiation oncologist.
A. Superficial x-ray radiation therapy may have the following complications:
Hair loss
Dryness
Soreness
Itching
Redness
Scab (a dry and rough crust) formation
Bleeding
A. The cost of superficial x-ray radiation therapy varies depending on the type and severity of cancer being treated, and the health of the patient.
The cost of superficial x-ray radiation therapy is different among different doctors in different hospitals. On average, the cost of superficial x-ray radiation therapy in India is between INR 1,50,000 to INR 3,50,000.